23 Temmuz 2014 tarihinde, Avrupa Birliği (AB) tarafından, denizcilik ekipmanları ile ilgili yeni direktif 2014/90/AB (2014/90/EU) 18 Eylül 2016 tarihinden itibaren geçerli olmak üzere yayınlanarak, eski direktif 96/98/AT (96(98/EC) yürürlükten kaldırılmıştır.
16 Mart 2017 tarihinden itibaren de 2014/90 / AB sayılı direktifte değişiklik yapan 2017/306 sayılı Uygulama Regülasyonu yürürlüğe girmiştir.
Denizcilik ekipmanları belgelendirmesinde Wheelmark işareti kullanılmaktadır.
Denizcilik Ekipmanları Direktifi (2014/90/EU) ürün bazında aşağıdaki şekilde gruplanmıştır.
Life-saving appliances (SOLAS III)
Marine pollution prevention equipment (MARPOL)
Fire protection equipment (SOLAS II-2)
Navigation equipment (SOLAS V)
Radio-communication equipment (SOLAS IV)
COLREG 72 - equipment
SOLAS II-1 - equipment
GCNTURK tarafından Wheelmark belgelendirilmesi yapılan ürünlerin listesi aşağıdaki gibidir:
MED/2.4, Process units intended for attachment to existing oily water separating equipment (for an oil content of the effluent not exceeding 15 p.p.m.),
MED/2.5 Oil discharge monitoring and control system for oil tankers
MED/3.7 Self-contained compressed-air- operated breathing apparatus Note: For use in accidents involving dangerous goods a positive pressure type mask is required.
MED/3.7 Self-contained compressed-air- operated breathing apparatus Note: For use in accidents involving dangerous goods a positive pressure type mask is required.
MED/3.9 Sprinkler systems components for accommodation spaces, service spaces and control stations equivalent to that referred to in SOLAS 74 Reg. II-2/12 (limited to nozzles and their performance). (Nozzles for fixed sprinkler systems, for high speed craft (HSC) are included under this item)
MED/3.10 -- Nozzles for fixed pressure water spraying fire extinguishing systems for machinery spaces and cargo pump-rooms
MED/3.11a ‘A’ & ‘B’ Class divisions fire integrity (a) ‘A’ class divisions
MED/3.11b ‘A’ & ‘B’ Class divisions fire integrity (b) ‘B’ class divisions.
MED/3.12 Devices to prevent the passage of flame into the cargo tanks in tankers
MED/3.12 Devices to prevent the passage of flame into the cargo tanks in tankers
MED/3.13 Non-combustible materials Type approval requirements
MED/3.14, Materials other than steel for pipes penetrating ‘A’ or ‘B’ Class division, -- included in MED/3.26 and MED/3.27
MED/3.15a Materials other than steel for pipes conveying oil or fuel oil (a) plastic pipes and fittings MED/3.15b Materials other than steel for pipes conveying oil or fuel oil (b) valves
MED/3.15c Materials other than steel for pipes conveying oil or fuel oil (c) flexible pipe assemblies and compensators
MED/3.15d Materials other than steel for pipes conveying oil or fuel oil (d) metallic pipe components with resilient and elastomeric seals
MED/3.17 Fire door control systems components. Note: When the term ‘system components’ is used in column 2 it may be that a single component, a group of components or a whole system needs to be tested to ensure that the international requirements are fulfilled.
MED/3.18a Surface materials and floor coverings with low flame-spread characteristics (a) decorative veneers
MED/3.18b Surface materials and floor coverings with low flame-spread characteristics (b) paint systems
MED/3.18c Surface materials and floor coverings with low flame-spread characteristics (c) floor coverings.
MED/3.18d Surface materials and floor coverings with low flame-spread characteristics (d) pipe insulation covers
MED/3.18e Surface materials and floor coverings with low flame-spread characteristics (e)adhesives used in the construction of ‘A’, ‘B’ & ‘C’ class divisions
MED/3.18f Surface materials and floor coverings with low flame-spread characteristics (f)combustible ducts membrane
MED/3.19 Draperies, curtains and other suspended textile materials and films
MED/3.23, Non combustible duct penetrations through ‘A’ class divisions
MED/3.24, Electric cable transits through ‘A’ class divisions
MED/3.25 ‘A’ and ‘B’ class fire proof windows and side scuttles
MED/3.26a Penetrations through ‘A’ class divisions (a) electric cable transits
MED/3.26a Penetrations through ‘A’ class divisions (a) electric cable transits
MED/3.26b Penetrations through ‘A’ class divisions (b)pipe, duct, trunk, etc. penetrations
MED/3.26b Penetrations through ‘A’ class divisions (b)pipe, duct, trunk, etc. penetrations
MED/3.27a Penetrations through ‘B’ class divisions (a) electric cable transits
MED/3.27b Penetrations through ‘B’ class divisions (b)pipe, duct, trunk, etc. Penetrations
MED/3.28 Sprinkler systems (limited to sprinkler heads). (Nozzles for fixed sprinkler systems, for high speed craft (HSC) are included under this item)
MED/3.45 Equivalent fixed gas fire extinguishing systems components (extinguishing medium, head valves and nozzles) for machinery spaces and cargo pump rooms
MED/3.46 Equivalent fixed gas fire extinguishing systems for machinery spaces (aerosol systems)
MED/3.47 Concentrate for fixed high expansion foam fire extinguishing systems for machinery spaces and cargo pump rooms. Note: The fixed high expansion foam fire extinguishing system (including those systems which use inside air from their working spaces for their intended performance), for machinery spaces and cargo pump rooms must still be tested with the approved concentrate to the satisfaction of the administration
MED/3.48 Fixed water based local application fire-fighting systems components for use in category A machinery spaces (Nozzles and performance tests)
MED/3.49a Fixed water-based fire-fighting systems for roro spaces, vehicle spaces and special category spaces (a) Prescriptive-based systems as per Circ.1430 Clause 4
MED/3.49b Fixed waterbased firefighting systems for roro spaces, vehicle spaces and special category spaces (b) Performance-based systems as per Circ. 1430 Clause 5
MED/3.51a Fixed fire detection and fire alarm systems components for control stations, service spaces, accommodation spaces, cabin balconies, machinery spaces and unattended machinery spaces: (a) Control and indicating equipment
MED/3.51a Fixed fire detection and fire alarm systems components for control stations, service spaces, accommodation spaces, cabin balconies, machinery spaces and unattended machinery spaces: (a) Control and indicating equipment
MED/3.51b Fixed fire detection and fire alarm systems components for control stations, service spaces, accommodation spaces, cabin balconies, machinery spaces and unattended machinery spaces: (b) Power supply equipment
MED/3.51c Fixed fire detection and fire alarm systems components for control stations, service spaces, accommodation spaces, cabin balconies, machinery spaces and unattended machinery spaces: (c)Heat detectors -- Point detectors,
MED/3.51d Fixed fire detection and fire alarm systems components for control stations, service spaces, accommodation spaces, cabin balconies, machinery spaces and unattended machinery spaces: (d)Smoke detectors: Point detectors using scattered light, transmitted light or ionization,
MED/3.51d Fixed fire detection and fire alarm systems components for control stations, service spaces, accommodation spaces, cabin balconies, machinery spaces and unattended machinery spaces: (d)Smoke detectors: Point detectors using scattered light, transmitted light or ionization
MED/3.51e Fixed fire detection and fire alarm systems components for control stations, service spaces, accommodation spaces, cabin balconies, machinery spaces and unattended machinery spaces: (e)Flame detectors: Point detectors
MED/3.51f Fixed fire detection and fire alarm systems components for control stations, service spaces, accommodation spaces, cabin balconies, machinery spaces and unattended machinery spaces: (f) Manual call points
MED/3.51 g Fixed fire detection and fire alarm systems components for control stations, service spaces, accommodation spaces, cabin balconies, machinery spaces and unattended machinery spaces: (g) Short circuit isolators
MED/3.51 h Fixed fire detection and fire alarm systems components for control stations, service spaces, accommodation spaces, cabin balconies, machinery spaces and unattended machinery spaces: (h) Input/output devices
MED/3.51i Fixed fire detection and fire alarm systems components for control stations, service spaces, accommodation spaces, cabin balconies, machinery spaces and unattended machinery spaces: (i) Cables.
MED/3.52 Non-portable and transportable fire extinguishers
MED/3.54 Fixed oxygen analysis and gas detection equipment
MED/3.55 Dual purpose type nozzles (spray/jet type)
MED/3.56 Fixed firefighting hose systems Hose reels with semi-rigid hose
MED/3.57 Medium Expansion Foam Fire Extinguishing Systems components -- Fixed Deck Foam for Tankers
MED/3.58 Fixed Low Expansion Foam Fire Extinguishing Systems Components for Machinery Spaces and Tanker Deck Protection.
MED/3.59 Expansion Foam for Fixed Fire Extinguishing Systems for Chemical Tankers
MED/3.60 -- Nozzles for fixed pressure water-spraying fire-extinguishing systems for cabin balconies
MED/3.61a (a) Inside air high expansion foam systems for the protection of machinery spaces, cargo pump rooms, vehicle and ro-ro spaces, special category spaces and cargo spaces. Note: Inside/Outside air high expansion foam systems for the protection of machinery spaces, cargo pump rooms, vehicle and ro-ro spaces, special category spaces and cargo spaces shall be tested with the approved concentrate to the satisfaction of the Administration
MED/3.61b (b) Outside air high expansion foam systems for the protection of machinery spaces, cargo pump rooms, vehicle and ro-ro spaces, special category spaces and cargo spaces. Note: Inside/Outside air high expansion foam systems for the protection of machinery spaces, cargo pump rooms, vehicle and ro-ro spaces, special category spaces and cargo spaces shall be tested with the approved concentrate to the satisfaction of the Administration
MED/3.62 Dry chemical powder extinguishing systems
MED/3.63 Sample extraction smoke detection systems components
MED/3.66 Evacuation guidance systems used as an alternative to low-location lighting systems MED/3.67 Helicopter facility foam fire- fighting appliances
MED/3.68 Galley Exhaust Duct Fixed Fire Extinguishing Systems components
MED/3.69 Mobile water monitor for ships constructed on or after 1 January 2016 designed to carry five or more tiers of containers on or above the weather deck (new item)
MED/3.70 Fire-fighting hoses Semi-rigid hoses for fixed systems (new item)
MED/3.71 Fixed firefighting hose systems Hose systems with lay-flat hose (new item)
MED/4.10 Direction finder -- Item deliberately left blank. Item MED/4.11. Loran equipment -- Item deliberately left blank. Item MED/4.12, Chaika equipment -- Item deliberately left blank Item MED/4.13 Decca navigator equipment -- Item deliberately left blank. 24.2.2017 L 48/86 Official Journal of the European Union EN
MED/4.48 ‘Mechanical pilot hoist’ is deliberately left blank (as IMO Res.MSC.308(88), in force on 1 July 2012, quotes: ‘Mechanical pilot hoists shall not be used’)
MED/5.10 MF radio caliable of transmitting and receiving DSC and radiotelelihony Note: In line with IMO and ITU decisions, the requirements for Two Tone Alarm generator and transmission on H3E are no longer alililicable in the testing standards
MED/5.14 MF/HF radio caliable of transmitting and receiving DSC, NBDli and radiotelelihony Note: In line with IMO and ITU decisions, the requirements for Two Tone Alarm generator and transmission on A3H are no longer alililicable in testing standards.
Uygunluk işareti, Onaylanmış Kuruluş numarası ve Wheelmark işaretinin iliştirildiği yılı içermelidir.
Örnek:
0437/17 0437/2017
Ayrıca, üreticiler ürünleri tanıma imkanı sağlayacak ürün tipi, parti veya seri numarası vb. unsurlar taşıdığından emin olmalıdır. Ek olarak, isimlerini, tescilli ticari unvanlarını veya tescilli ticari markalarını ve iletişim adreslerini ürün üzerinde belirtmelidirler.
Üreticiler teknik dokümantasyonu ve Uygunluk Beyanlarını (Declaration of Conformity) Wheel Mark işareti iliştirildikten sonra en az 10 yıl ve ürünün beklenen ömründen daha kısa olmayacak şekilde saklamalıdır.
Module B and G belgelendirmeleri için üretici risk analizi ve değerlendirmesi yapmalıdır.
Uygunluk Beyanlarını (Declaration of Conformity) 768/2008/AT (768/2008/EC) Sayılı Karar Annex III'te belirtilen formata göre hazırlamalıdır.
TERSANELER VE ARMATÖRLER İÇİN DEĞİŞİKLİKLER
Uygunluk Beyanlarının (Declaration of Conformity) AB bayraklı gemilerde bulunması gereklidir. Denizcilik ekipmanı AB bayraklı bir gemide bulunduğunda, ilgili ekipmanın Uygunluk Beyanı (Declaration of Conformity) gemiye sağlanmalı ve ekipman gemiden kaldırılana kadar gemide muhafaza edilmelidir.
Detaylı bilgi almak için lütfen mplanlama@gcnturk.com adresini, yan tarafta bulunan iletişim formunu veya +90 216 365 78 38 nolu telefonu kullanarak bize ulaşınız.